Eco Tape 50 adhesive tape

Quantity	Unit price	Base price
To 4	€121.80	€10.15 / 1 RL
To 14	€110.70	€9.23 / 1 RL
From 15	€100.50	€8.38 / 1 RL

Prices incl. VAT

1 Review

Stretchable & extremely adhesive
High flexibility & aging resistance
Airtight bonding & sealing

Dimensions
25 m X 50 mm

Rolls per carton
12 Rolls

Execution

Box

Roll

Available for immediate delivery | leaves our warehouse within 24 hours on working days

Free Shipping

Total:

Box

Product number: SW10052.1

Available variants

Preview	Product number	Execution	Content	Unit price	Buy

Extreme adhesive strength
Stretchable
For the interior

Product advantages

For indoor use

Airtight bonding & sealing

Simple installation

Time saving

Strong adhesive strength

High quality

✓

EXTREME ADHESIVE STRENGTH AND FLEXIBILITY - Permanent airtight sealing of vapor retarders, roof and façade membranes for indoor use. Ideal for overlaps, connections and repairs.
✓

HIGH AGEING RESISTANCE - The high-quality acrylic adhesive ensures that the high-performance tape is securely anchored over a long service life. Moisture-resistant and durable.
✓

FREE FROM RESIDENTIAL TOXINS - Our ALMO Eco Tape 50 is free from solvents, chlorine and formaldehyde.

Technical data

Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Silicone paper
Roll length	25m
Width	50mm
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

Carrier system:	Grid-reinforced LDPE film
Adhesive:	Modified dispersion acrylate
Roll length:	25m
Width:	50mm
Temperature resistance:	-40 °C to +100 °C
Processing temperature:	-5 °C to +40 °C

Downloads

Data sheet_Eco Tape 50

Fiche technique_Eco Tape 50

Use for this

Use with

ProLine 220G Roof membrane

Grid reinforced
Open to diffusion
Integrated self-adhesive seam

Product advantages

Extremely tear-resistant

Highest tractive force lengthwise & crosswise

Temperature resistant

Withstands extreme conditions

Temporary cover

Flexible use

✓

HIGH-PERFORMANCE AND SAFE - The ALMO 220g underlay sets new standards in roof technology with its four-layer, grid-reinforced structure. It not only offers outstanding diffusion capacity (Sd value 0.02 m) and robustness, but also excellent fall-through protection that meets the strict criteria of DIN 4426.
✓

UV- AND FIRE RESISTANCE - Equipped with a 3-month UV resistance and rated fire class E, our underlayment offers reliable performance in various environmental conditions, making it the ideal choice for numerous construction projects.
✓

OUTSTANDING VAPOR PERMEABILITY - With an sd value of 0.02 m, the UV underlay promotes excellent moisture regulation, improves the indoor climate and effectively prevents mold growth.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 220G is versatile and can be used for roof pitches from 10°.
✓

WATERPROOF AND OPEN TO DIFFUSION - With a surface weight of 220g/m² and a W1 classification for resistance to water penetration, our underlay membrane guarantees protection against driving rain while remaining open to diffusion and enabling optimum moisture regulation.
✓

USER-FRIENDLY ASSEMBLY - Installation is simplified by two integrated self-adhesive strips, enabling quick and easy installation. This efficient installation method saves considerable time and guarantees lasting reliability and performance.

Technical Data

Application	Underlayment
Features	Grid-reinforced, self-adhesive seam
Carrier system	Polypropylene fleece
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	700/600
Roll length	50m
Width	1,5m
m² pro Rolle	75
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

(3)

Content: 75 m² (€2.00 / 1 m²)

From €49.89

Buy now

Topseller

Vapour barrier Vapora Vario SD

Execution: 1.5m x 25m

Variable humidity regulation
With laying and bonding lines
Tearproof and dimensionally stable

Product advantages

Variable moisture regulation

Stretchable and flexible

Adaptable & robust

Laying lines

Easy alignment & time saving

✓

HIGH FUNCTIONALITY AND SAFETY - The ALMO vapor barrier is tear-resistant, dimensionally stable and meets the strict requirements of fire class B as well as the ZVDH and EnEV standards, making it ideal for new builds, conversions and renovations. Provides the best protection against structural damage and mold.
✓

OPTIMUM MOISTURE REGULATION - Thanks to the variable sd value of 0.4 to 3.2 m, our vapor barrier film adapts to seasonal conditions to effectively regulate moisture and prevent the formation of condensation.
✓

BREATHABLE - The high-quality vapor barrier is breathable and helps to create an airtight building envelope that improves the indoor climate and increases energy efficiency.
✓

UNIVERSALLY APPLICABLE & SUSTAINABLE - Our ALMO vapor retarder combines moisture-regulating properties with outstanding re-drying potential to promote sustainable, robust and healthy construction. Particularly suitable for internal and external insulation between rafters and for insulation on top of rafters with mineral insulation.
✓

EASY INSTALLATION - The vapor barrier foil is easy to install and supports fast and error-free installation thanks to the gluing and laying lines.

Technical Data

Execution	1.5m x 25m
Features	Fire classification B
Diffusion-equivalent air layer thickness (sd value)	0,4m - 3m variable
Roll length	25m
Width	1,5m
m² per roll	37,5
Processing temperature	-5 °C to +40 °C
Fire classification	Class B - s2 - d0
Resistance to water passage	W1 (according to DIN 1928)

Installation instructions for Vapora Vario SD vapor retarder

Step 1: Laying and fixing the vapor barrier

Lay the ALMO Vapora Vario vapor barrier on the rafters and fix it either with a stapler or by masking it with the ALMO TwinTape.

Step 2: Overlapping installation and airtight connection

Lay the second vapor barrier film with an overlap and also fix it in place either with ALMO TwinTape or by stapling. Connect the two vapor retarders with the Versa® Uni Tape 60 Adhesive tape for additional sealing. Use the overlap guide line for an overlap of 10 cm. For airtight bonding, you can use the auxiliary line at 30 mm to ensure optimum sealing with the 60 mm wide Versa® Uni Tape 60.

Step 3: Airtight bonding of the folds

To ensure an airtight seal, tape the folds of the vapor barrier in a T-shape with the Versa® Uni Tape 60 .

Step 4a: Transverse counter battens and protective cladding

Attach counter battens across the structure to support the weight of the insulation material. Then install the interior cladding to protect the vapor barrier from mechanical influences.

Step 4b: Longitudinal installation for heavy insulation materials

For wide rafter bays or heavy insulation material, we recommend laying the Vapora Vario SD in the direction of the rafters and installing the counter battens lengthways.

Step 5: Terminating and sealing penetrations

For penetrations such as pipes, make a star-shaped cut and seal the pipe with small pieces of the Versa® Uni Tape 60 off. Alternatively, a flange can be inserted and securely bonded with Versa® Uni Tape 60.

(3)

Content: 37.5 m² (€1.83 / 1 m²)

Variants from €37.50

€68.80

Roll

Topseller

ProLine 150 Roof and facade membrane

Driving rain proof
Open to diffusion
Integrated self-adhesive seam

Product advantages

UV-resistant

Long-term protection

Open to diffusion

Prevents mold growth

Driving rain proof

Waterproof, protection from rain

✓

EASY TO INSTALL - With a surface weight of 150g/m² and double self-adhesive strips (SK), ProLine 150 is safe and quick to install.
✓

EXTREMELY OPEN TO DIFFUSION - The water vapor-permeable special membrane allows the insulation to dry out optimally and prevents mold growth.
✓

VARIABLY APPLICABLE - The ALMO underlay can also be used as a façade membrane for closed facades.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 150 is versatile and can be used for roof pitches from 10°.
✓

VERY TEAR RESISTANT - The three-layer construction with 2 nonwovens on the outside and a special membrane makes the ProLine 150 very tear-resistant
✓

A-classification - The ALMO ProLine 150 complies with the ZVDH classification UDB-A / USB-A.

Technical data

Application	Underlayment
Features	Self-adhesive seam, open to diffusion
Carrier system	Polypropylene fleece
Functional layer	Microporous functional film
Grammage	150 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	315/225
Roll length	25m
Width	1,5m
m² per roll	37,5
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water penetration	W1 (according to DIN 1928)

(11)

Content: 75 m² (€1.56 / 1 m²)

From €43.50

Buy now

Topseller

TOPCOAT Thermo 220 Roof membrane

Permanently UV-resistant
Heat resistant
Nail-tight

Product advantages

Highly diffusion-open

Prevents mold growth

Nail-tight

Protects against water ingress

UV-resistant

Permanently UV-stable

✓

PERMANENTLY UV-STABLE - With extreme UV stability, the ALMO TOPCOAT Thermo underlay can withstand intense sunlight and offers long-lasting protection, ideal for permanently exposed applications.
✓

HEAT RESISTANT UP TO 150°C - Developed for extreme temperatures, this underlay can withstand temperatures of up to 150°C and is ideal for hot roof constructions without losing any of its functionality.
✓

DRIVING RAIN-PROOF & NAIL-TIGHT - TOPCOAT Thermo 220 UV provides reliable protection against driving rain and offers high nail tightness, so that your roof remains perfectly sealed in all weather conditions.
✓

HIGHLY DIFFUSION-OPEN - The sd value of 0.1m enables optimum vapor permeability and regulates moisture to effectively prevent mold growth in the roof insulation.
✓

EXTREMELY ROBUST - With its extremely high tear resistance and strong tear propagation resistance, TOPCOAT Thermo 220 UV is particularly robust and can withstand even the most demanding conditions on the construction site.
✓

SECURE BONDING - The integrated self-adhesive seam ensures direct and reliable bonding of the overlaps and effectively protects the insulation from cold air and moisture. This promotes energy efficiency and increases living comfort.

Technical data

ZVDH product data sheet class	UDB-A / USB-A
Application	underlay membrane
Functional layer	Acrylic special coating
Carrier material	Polyester fleece
Characteristics	Permanently UV-stable, nail-proof
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,1m
Maximum tensile force longitudinal / transverse in N / 50mm	350/260
Execution	1.5m x 50m
Roll length	50m
Width	1,5m
m² per roll	75
UV resistance	Permanent
Temperature resistance	-40 °C to +150 °C
Fire classification	Class E
Resistance to water penetration	W1 (according to DIN 1928)
Suitability as temporary covering	3 months

(6)

Content: 75 m² (€2.79 / 1 m²)

From €52.50

Buy now

TOPCOAT TPU 240 Roof membrane

Nail-tight
Highly diffusible
TPU coating

Product advantages

Nail-tight

Penetration protection

UV-resistant

Long-term protection

Temperature resistant

Withstands extreme conditions

✓

UV-RESISTANT & DURABLE - With a UV resistance of up to 3 months and a robust polyurethane (TPU) coating, our underlayment offers long-lasting protection and durability.
✓

NAIL-TIGHT & RESISTANT TO DRIVING RAIN - The TOPCOAT TPU 240 underlay offers high nail tightness and is resistant to driving rain to ensure maximum protection in all weather conditions.
✓

HIGHLY DIFFUSIBLE - The sd value of 0.15 m guarantees effective moisture regulation and prevents condensation, thereby preventing mold growth.
✓

TEMPERATURE RESISTANCE - Withstands extreme temperatures from -40°C to +100°C while remaining flexible and functional.
✓

TIME SAVING - The integrated self-adhesive seam saves time during installation and ensures quick and secure installation, even with overlaps and connections.

Technical Data

Application	Underlayment
Features	Self-adhesive seam, nail-tight
Carrier system	Polyester fleece
Functional layer	Polyurethane (TPU) coating
Grammage	240 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,15m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	350/310
Roll length	40m
Width	1,5m
m² per roll	60
Suitability as temporary covering	12 Weeks
UV resistance	3 months
Temperature resistance	-40 °C to +100 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

TOPCOAT TPU roofing membrane installation instructions

Step 1: Align and prepare the roof membrane

The ALMO TOPCOAT TPU 240 sarking and underlay membrane should be laid starting at the lower part of the roof pitch and parallel to the eaves. The printed side is the upper side and faces the installer during installation. The membrane is rolled out directly onto the rafters or onto the fully sheathed roof. The underlay should protrude slightly after positioning.

Step 2: Attachment in the eaves area

In the eaves area, the roofing membrane must be fastened under the counter battens on the eaves sheet or above the eaves batten on the gutter lashing. At the same time, water pockets and counterfalls should be avoided. Fasten the underlays to the rafters with nails or staples.

Step 3: Nail sealing tape and counter battens

To keep the rafters watertight, we recommend using a strip of our Nail sealing tape 60 under the counter battens. After spreading the membrane, counter battens and battens should be attached. The counter battens create a gap between the membrane and the battens. Ensure that all points where nails or staples pass through the membrane are sealed with nail sealing tape and are located under the counter battens.

Step 4: Overlapping and bonding underlayments

Another strip of membrane should be applied with a 10-15 cm overlap. To make the installation of the roofing membrane efficient, avoid draughts and keep the overlaps watertight, use the adhesive strips integrated with the membrane, which are glued together.

Step 5: Ridge sealing

For non-ventilated roof constructions, the membrane goes over the ridge to seal it against snow and rain. For ventilated roof constructions, the roof membrane should be approx. 5 cm from the highest ridge point. This ventilation opening should also be secured with a strip of roofing membrane fixed over a counter batten so that the membrane overlaps the roof surface by approx. 20 cm.

Step 6: Sealing for eaves

In the case of roof projections such as chimneys, the sheets should be cut, pulled out and fixed with the ALMO Versa Uni Tape be sealed. Separate strips of membrane are glued to the surface and at the corners. An inclined foil gutter can be installed above penetrating building components. To form a temporary covering, connections to rising building components must also be bonded and secured to prevent them from running behind.

Step 7: Seal overlaps to make them windproof

The resulting overlaps must be bonded laterally and transversely if wind-tightness is required. For a replacement overlap, the membrane strip of a foil gutter is extended to below the next ridge-side height overlap and taped all the way around. The open joints at the corners are taped to make them rainproof. Roof windows are integrated into the opening and fixed in place. If counter battens or the resulting frame are further away from the window, separate strips of membrane can be attached.

(2)

Content: 60 m² (€2.64 / 1 m²)

From €158.50

Buy now

Reviews

1 of 1 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Sort by

7 October 2024 11:51

Ließ sich gut verarbeiten und klebte zufriedenstellend.

Use with

ProLine 220G Roof membrane

Grid reinforced
Open to diffusion
Integrated self-adhesive seam

Product advantages

Extremely tear-resistant

Highest tractive force lengthwise & crosswise

Temperature resistant

Withstands extreme conditions

Temporary cover

Flexible use

✓

HIGH-PERFORMANCE AND SAFE - The ALMO 220g underlay sets new standards in roof technology with its four-layer, grid-reinforced structure. It not only offers outstanding diffusion capacity (Sd value 0.02 m) and robustness, but also excellent fall-through protection that meets the strict criteria of DIN 4426.
✓

UV- AND FIRE RESISTANCE - Equipped with a 3-month UV resistance and rated fire class E, our underlayment offers reliable performance in various environmental conditions, making it the ideal choice for numerous construction projects.
✓

OUTSTANDING VAPOR PERMEABILITY - With an sd value of 0.02 m, the UV underlay promotes excellent moisture regulation, improves the indoor climate and effectively prevents mold growth.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 220G is versatile and can be used for roof pitches from 10°.
✓

WATERPROOF AND OPEN TO DIFFUSION - With a surface weight of 220g/m² and a W1 classification for resistance to water penetration, our underlay membrane guarantees protection against driving rain while remaining open to diffusion and enabling optimum moisture regulation.
✓

USER-FRIENDLY ASSEMBLY - Installation is simplified by two integrated self-adhesive strips, enabling quick and easy installation. This efficient installation method saves considerable time and guarantees lasting reliability and performance.

Technical Data

Application	Underlayment
Features	Grid-reinforced, self-adhesive seam
Carrier system	Polypropylene fleece
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	700/600
Roll length	50m
Width	1,5m
m² pro Rolle	75
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

(3)

Content: 75 m² (€2.00 / 1 m²)

From €49.89

Buy now

Topseller

Vapour barrier Vapora Vario SD

Execution: 1.5m x 25m

Variable humidity regulation
With laying and bonding lines
Tearproof and dimensionally stable

Product advantages

Variable moisture regulation

Stretchable and flexible

Adaptable & robust

Laying lines

Easy alignment & time saving

✓

HIGH FUNCTIONALITY AND SAFETY - The ALMO vapor barrier is tear-resistant, dimensionally stable and meets the strict requirements of fire class B as well as the ZVDH and EnEV standards, making it ideal for new builds, conversions and renovations. Provides the best protection against structural damage and mold.
✓

OPTIMUM MOISTURE REGULATION - Thanks to the variable sd value of 0.4 to 3.2 m, our vapor barrier film adapts to seasonal conditions to effectively regulate moisture and prevent the formation of condensation.
✓

BREATHABLE - The high-quality vapor barrier is breathable and helps to create an airtight building envelope that improves the indoor climate and increases energy efficiency.
✓

UNIVERSALLY APPLICABLE & SUSTAINABLE - Our ALMO vapor retarder combines moisture-regulating properties with outstanding re-drying potential to promote sustainable, robust and healthy construction. Particularly suitable for internal and external insulation between rafters and for insulation on top of rafters with mineral insulation.
✓

EASY INSTALLATION - The vapor barrier foil is easy to install and supports fast and error-free installation thanks to the gluing and laying lines.

Technical Data

Execution	1.5m x 25m
Features	Fire classification B
Diffusion-equivalent air layer thickness (sd value)	0,4m - 3m variable
Roll length	25m
Width	1,5m
m² per roll	37,5
Processing temperature	-5 °C to +40 °C
Fire classification	Class B - s2 - d0
Resistance to water passage	W1 (according to DIN 1928)

Installation instructions for Vapora Vario SD vapor retarder

Step 1: Laying and fixing the vapor barrier

Lay the ALMO Vapora Vario vapor barrier on the rafters and fix it either with a stapler or by masking it with the ALMO TwinTape.

Step 2: Overlapping installation and airtight connection

Step 3: Airtight bonding of the folds

To ensure an airtight seal, tape the folds of the vapor barrier in a T-shape with the Versa® Uni Tape 60 .

Step 4a: Transverse counter battens and protective cladding

Attach counter battens across the structure to support the weight of the insulation material. Then install the interior cladding to protect the vapor barrier from mechanical influences.

Step 4b: Longitudinal installation for heavy insulation materials

For wide rafter bays or heavy insulation material, we recommend laying the Vapora Vario SD in the direction of the rafters and installing the counter battens lengthways.

Step 5: Terminating and sealing penetrations

(3)

Content: 37.5 m² (€1.83 / 1 m²)

Variants from €37.50

€68.80

Roll

Topseller

ProLine 150 Roof and facade membrane

Driving rain proof
Open to diffusion
Integrated self-adhesive seam

Product advantages

UV-resistant

Long-term protection

Open to diffusion

Prevents mold growth

Driving rain proof

Waterproof, protection from rain

✓

EASY TO INSTALL - With a surface weight of 150g/m² and double self-adhesive strips (SK), ProLine 150 is safe and quick to install.
✓

EXTREMELY OPEN TO DIFFUSION - The water vapor-permeable special membrane allows the insulation to dry out optimally and prevents mold growth.
✓

VARIABLY APPLICABLE - The ALMO underlay can also be used as a façade membrane for closed facades.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 150 is versatile and can be used for roof pitches from 10°.
✓

VERY TEAR RESISTANT - The three-layer construction with 2 nonwovens on the outside and a special membrane makes the ProLine 150 very tear-resistant
✓

A-classification - The ALMO ProLine 150 complies with the ZVDH classification UDB-A / USB-A.

Technical data

Application	Underlayment
Features	Self-adhesive seam, open to diffusion
Carrier system	Polypropylene fleece
Functional layer	Microporous functional film
Grammage	150 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	315/225
Roll length	25m
Width	1,5m
m² per roll	37,5
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water penetration	W1 (according to DIN 1928)

(11)

Content: 75 m² (€1.56 / 1 m²)

From €43.50

Buy now

Topseller

TOPCOAT Thermo 220 Roof membrane

Permanently UV-resistant
Heat resistant
Nail-tight

Product advantages

Highly diffusion-open

Prevents mold growth

Nail-tight

Protects against water ingress

UV-resistant

Permanently UV-stable

✓

PERMANENTLY UV-STABLE - With extreme UV stability, the ALMO TOPCOAT Thermo underlay can withstand intense sunlight and offers long-lasting protection, ideal for permanently exposed applications.
✓

HEAT RESISTANT UP TO 150°C - Developed for extreme temperatures, this underlay can withstand temperatures of up to 150°C and is ideal for hot roof constructions without losing any of its functionality.
✓

DRIVING RAIN-PROOF & NAIL-TIGHT - TOPCOAT Thermo 220 UV provides reliable protection against driving rain and offers high nail tightness, so that your roof remains perfectly sealed in all weather conditions.
✓

HIGHLY DIFFUSION-OPEN - The sd value of 0.1m enables optimum vapor permeability and regulates moisture to effectively prevent mold growth in the roof insulation.
✓

EXTREMELY ROBUST - With its extremely high tear resistance and strong tear propagation resistance, TOPCOAT Thermo 220 UV is particularly robust and can withstand even the most demanding conditions on the construction site.
✓

SECURE BONDING - The integrated self-adhesive seam ensures direct and reliable bonding of the overlaps and effectively protects the insulation from cold air and moisture. This promotes energy efficiency and increases living comfort.

Technical data

ZVDH product data sheet class	UDB-A / USB-A
Application	underlay membrane
Functional layer	Acrylic special coating
Carrier material	Polyester fleece
Characteristics	Permanently UV-stable, nail-proof
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,1m
Maximum tensile force longitudinal / transverse in N / 50mm	350/260
Execution	1.5m x 50m
Roll length	50m
Width	1,5m
m² per roll	75
UV resistance	Permanent
Temperature resistance	-40 °C to +150 °C
Fire classification	Class E
Resistance to water penetration	W1 (according to DIN 1928)
Suitability as temporary covering	3 months

(6)

Content: 75 m² (€2.79 / 1 m²)

From €52.50

Buy now

TOPCOAT TPU 240 Roof membrane

Nail-tight
Highly diffusible
TPU coating

Product advantages

Nail-tight

Penetration protection

UV-resistant

Long-term protection

Temperature resistant

Withstands extreme conditions

✓

UV-RESISTANT & DURABLE - With a UV resistance of up to 3 months and a robust polyurethane (TPU) coating, our underlayment offers long-lasting protection and durability.
✓

NAIL-TIGHT & RESISTANT TO DRIVING RAIN - The TOPCOAT TPU 240 underlay offers high nail tightness and is resistant to driving rain to ensure maximum protection in all weather conditions.
✓

HIGHLY DIFFUSIBLE - The sd value of 0.15 m guarantees effective moisture regulation and prevents condensation, thereby preventing mold growth.
✓

TEMPERATURE RESISTANCE - Withstands extreme temperatures from -40°C to +100°C while remaining flexible and functional.
✓

TIME SAVING - The integrated self-adhesive seam saves time during installation and ensures quick and secure installation, even with overlaps and connections.

Technical Data

Application	Underlayment
Features	Self-adhesive seam, nail-tight
Carrier system	Polyester fleece
Functional layer	Polyurethane (TPU) coating
Grammage	240 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,15m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	350/310
Roll length	40m
Width	1,5m
m² per roll	60
Suitability as temporary covering	12 Weeks
UV resistance	3 months
Temperature resistance	-40 °C to +100 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

TOPCOAT TPU roofing membrane installation instructions

Step 1: Align and prepare the roof membrane

Step 2: Attachment in the eaves area

Step 3: Nail sealing tape and counter battens

Step 4: Overlapping and bonding underlayments

Step 5: Ridge sealing

Step 6: Sealing for eaves

Step 7: Seal overlaps to make them windproof

(2)

Content: 60 m² (€2.64 / 1 m²)

From €158.50

Buy now