Versa® Uni Tape 100 50/50 adhesive tape

€25.90

Content: 25 Running meter (€1.04 / 1 Running meter)

Prices incl. VAT

3 Reviews

Stretchable with extreme adhesion
High flexibility & aging resistance
Air & windtight bonding & sealing

Dimensions:
25 m X 100 mm

Rolls per Box
6 Rolls

Execution

Box

Roll

Available for immediate delivery | leaves our warehouse within 24 hours on working days

Free Shipping

Total:

Rolls

Product number: SW10037.2

Available variants

Preview	Product number	Execution	Content	Unit price	Buy

Extreme adhesive strength
Tear-resistant, slit separating strip
For inside and outside

Product advantages

For inside and outside

Versatile application

Tear-resistant liner

Time saving

High adhesive strength in cold & heat

High quality

✓

EXTREME ADHESIVE STRENGTH AND FLEXIBILITY - Durable airtight and windproof sealing of vapor retarders, roof and façade membranes for interior and exterior use. Ideal for overlaps, connections and repairs.
✓

EASY INSTALLATION - The unique tear-resistant cover liner enables effortless, fast application, especially for long overlaps and overhead work.
✓

HIGH AGEING RESISTANCE - The high-quality acrylic adhesive ensures that the high-performance tape is securely anchored over a long service life. Moisture-resistant and durable.
✓

FREE FROM RESIDENTIAL TOXINS - ALMO Versa is free of solvents, chlorine and formaldehyde.

Technical data

Features	Slitted, tear-resistant liner
Carrier system	Grid-reinforced LDPE film
Adhesive	Modified dispersion acrylate
Coverage	Tear-resistant plastic liner, slotted
Roll length	25m
Width	100mm, Liner slitted at 50/50
Temperature resistance	-40 °C to +100 °C
Processing temperature	-5 °C to +40 °C

Carrier system:	Grid-reinforced LDPE film
Characteristics:	Slitted, Tear resistant liner
Adhesive:	Modified dispersion acrylate
Cover:	Tear-resistant plastic liner, slit
Roll length:	25m
Width:	100mm, liner slit at 50/50
Temperature resistance:	-40 °C to +100 °C
Processing temperature:	-5 °C to +40 °C

Downloads

Data sheet_Versa Uni Tape 100

Fiche technique_Versa Uni Tape 100

Zertifikat Emicode ALMO Versa

Use for this

Use with

Topseller

ProLine 150 Roof and facade membrane

Driving rain proof
Open to diffusion
Integrated self-adhesive seam

Product advantages

UV-resistant

Long-term protection

Open to diffusion

Prevents mold growth

Driving rain proof

Waterproof, protection from rain

✓

EASY TO INSTALL - With a surface weight of 150g/m² and double self-adhesive strips (SK), ProLine 150 is safe and quick to install.
✓

EXTREMELY OPEN TO DIFFUSION - The water vapor-permeable special membrane allows the insulation to dry out optimally and prevents mold growth.
✓

VARIABLY APPLICABLE - The ALMO underlay can also be used as a façade membrane for closed facades.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 150 is versatile and can be used for roof pitches from 10°.
✓

VERY TEAR RESISTANT - The three-layer construction with 2 nonwovens on the outside and a special membrane makes the ProLine 150 very tear-resistant
✓

A-classification - The ALMO ProLine 150 complies with the ZVDH classification UDB-A / USB-A.

Technical data

Application	Underlayment
Features	Self-adhesive seam, open to diffusion
Carrier system	Polypropylene fleece
Functional layer	Microporous functional film
Grammage	150 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	315/225
Roll length	25m
Width	1,5m
m² per roll	37,5
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water penetration	W1 (according to DIN 1928)

(11)

Content: 75 m² (€1.56 / 1 m²)

From €43.50

Buy now

ProLine 220G Roof membrane

Grid reinforced
Open to diffusion
Integrated self-adhesive seam

Product advantages

Extremely tear-resistant

Highest tractive force lengthwise & crosswise

Temperature resistant

Withstands extreme conditions

Temporary cover

Flexible use

✓

HIGH-PERFORMANCE AND SAFE - The ALMO 220g underlay sets new standards in roof technology with its four-layer, grid-reinforced structure. It not only offers outstanding diffusion capacity (Sd value 0.02 m) and robustness, but also excellent fall-through protection that meets the strict criteria of DIN 4426.
✓

UV- AND FIRE RESISTANCE - Equipped with a 3-month UV resistance and rated fire class E, our underlayment offers reliable performance in various environmental conditions, making it the ideal choice for numerous construction projects.
✓

OUTSTANDING VAPOR PERMEABILITY - With an sd value of 0.02 m, the UV underlay promotes excellent moisture regulation, improves the indoor climate and effectively prevents mold growth.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 220G is versatile and can be used for roof pitches from 10°.
✓

WATERPROOF AND OPEN TO DIFFUSION - With a surface weight of 220g/m² and a W1 classification for resistance to water penetration, our underlay membrane guarantees protection against driving rain while remaining open to diffusion and enabling optimum moisture regulation.
✓

USER-FRIENDLY ASSEMBLY - Installation is simplified by two integrated self-adhesive strips, enabling quick and easy installation. This efficient installation method saves considerable time and guarantees lasting reliability and performance.

Technical Data

Application	Underlayment
Features	Grid-reinforced, self-adhesive seam
Carrier system	Polypropylene fleece
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	700/600
Roll length	50m
Width	1,5m
m² pro Rolle	75
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

(3)

Content: 75 m² (€2.00 / 1 m²)

From €49.89

Buy now

Topseller

TOPCOAT Thermo 220 Roof membrane

Permanently UV-resistant
Heat resistant
Nail-tight

Product advantages

Highly diffusion-open

Prevents mold growth

Nail-tight

Protects against water ingress

UV-resistant

Permanently UV-stable

✓

PERMANENTLY UV-STABLE - With extreme UV stability, the ALMO TOPCOAT Thermo underlay can withstand intense sunlight and offers long-lasting protection, ideal for permanently exposed applications.
✓

HEAT RESISTANT UP TO 150°C - Developed for extreme temperatures, this underlay can withstand temperatures of up to 150°C and is ideal for hot roof constructions without losing any of its functionality.
✓

DRIVING RAIN-PROOF & NAIL-TIGHT - TOPCOAT Thermo 220 UV provides reliable protection against driving rain and offers high nail tightness, so that your roof remains perfectly sealed in all weather conditions.
✓

HIGHLY DIFFUSION-OPEN - The sd value of 0.1m enables optimum vapor permeability and regulates moisture to effectively prevent mold growth in the roof insulation.
✓

EXTREMELY ROBUST - With its extremely high tear resistance and strong tear propagation resistance, TOPCOAT Thermo 220 UV is particularly robust and can withstand even the most demanding conditions on the construction site.
✓

SECURE BONDING - The integrated self-adhesive seam ensures direct and reliable bonding of the overlaps and effectively protects the insulation from cold air and moisture. This promotes energy efficiency and increases living comfort.

Technical data

ZVDH product data sheet class	UDB-A / USB-A
Application	underlay membrane
Functional layer	Acrylic special coating
Carrier material	Polyester fleece
Characteristics	Permanently UV-stable, nail-proof
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,1m
Maximum tensile force longitudinal / transverse in N / 50mm	350/260
Execution	1.5m x 50m
Roll length	50m
Width	1,5m
m² per roll	75
UV resistance	Permanent
Temperature resistance	-40 °C to +150 °C
Fire classification	Class E
Resistance to water penetration	W1 (according to DIN 1928)
Suitability as temporary covering	3 months

(6)

Content: 75 m² (€2.79 / 1 m²)

From €52.50

Buy now

TOPCOAT TPU 240 Roof membrane

Nail-tight
Highly diffusible
TPU coating

Product advantages

Nail-tight

Penetration protection

UV-resistant

Long-term protection

Temperature resistant

Withstands extreme conditions

✓

UV-RESISTANT & DURABLE - With a UV resistance of up to 3 months and a robust polyurethane (TPU) coating, our underlayment offers long-lasting protection and durability.
✓

NAIL-TIGHT & RESISTANT TO DRIVING RAIN - The TOPCOAT TPU 240 underlay offers high nail tightness and is resistant to driving rain to ensure maximum protection in all weather conditions.
✓

HIGHLY DIFFUSIBLE - The sd value of 0.15 m guarantees effective moisture regulation and prevents condensation, thereby preventing mold growth.
✓

TEMPERATURE RESISTANCE - Withstands extreme temperatures from -40°C to +100°C while remaining flexible and functional.
✓

TIME SAVING - The integrated self-adhesive seam saves time during installation and ensures quick and secure installation, even with overlaps and connections.

Technical Data

Application	Underlayment
Features	Self-adhesive seam, nail-tight
Carrier system	Polyester fleece
Functional layer	Polyurethane (TPU) coating
Grammage	240 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,15m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	350/310
Roll length	40m
Width	1,5m
m² per roll	60
Suitability as temporary covering	12 Weeks
UV resistance	3 months
Temperature resistance	-40 °C to +100 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

TOPCOAT TPU roofing membrane installation instructions

Step 1: Align and prepare the roof membrane

The ALMO TOPCOAT TPU 240 sarking and underlay membrane should be laid starting at the lower part of the roof pitch and parallel to the eaves. The printed side is the upper side and faces the installer during installation. The membrane is rolled out directly onto the rafters or onto the fully sheathed roof. The underlay should protrude slightly after positioning.

Step 2: Attachment in the eaves area

In the eaves area, the roofing membrane must be fastened under the counter battens on the eaves sheet or above the eaves batten on the gutter lashing. At the same time, water pockets and counterfalls should be avoided. Fasten the underlays to the rafters with nails or staples.

Step 3: Nail sealing tape and counter battens

To keep the rafters watertight, we recommend using a strip of our Nail sealing tape 60 under the counter battens. After spreading the membrane, counter battens and battens should be attached. The counter battens create a gap between the membrane and the battens. Ensure that all points where nails or staples pass through the membrane are sealed with nail sealing tape and are located under the counter battens.

Step 4: Overlapping and bonding underlayments

Another strip of membrane should be applied with a 10-15 cm overlap. To make the installation of the roofing membrane efficient, avoid draughts and keep the overlaps watertight, use the adhesive strips integrated with the membrane, which are glued together.

Step 5: Ridge sealing

For non-ventilated roof constructions, the membrane goes over the ridge to seal it against snow and rain. For ventilated roof constructions, the roof membrane should be approx. 5 cm from the highest ridge point. This ventilation opening should also be secured with a strip of roofing membrane fixed over a counter batten so that the membrane overlaps the roof surface by approx. 20 cm.

Step 6: Sealing for eaves

In the case of roof projections such as chimneys, the sheets should be cut, pulled out and fixed with the ALMO Versa Uni Tape be sealed. Separate strips of membrane are glued to the surface and at the corners. An inclined foil gutter can be installed above penetrating building components. To form a temporary covering, connections to rising building components must also be bonded and secured to prevent them from running behind.

Step 7: Seal overlaps to make them windproof

The resulting overlaps must be bonded laterally and transversely if wind-tightness is required. For a replacement overlap, the membrane strip of a foil gutter is extended to below the next ridge-side height overlap and taped all the way around. The open joints at the corners are taped to make them rainproof. Roof windows are integrated into the opening and fixed in place. If counter battens or the resulting frame are further away from the window, separate strips of membrane can be attached.

(2)

Content: 60 m² (€2.64 / 1 m²)

From €158.50

Buy now

Reviews

3 of 3 reviews

5 out of 5 stars

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Sort by

21 July 2024 09:28

Alles gut, gerne wieder.

16 May 2024 13:59

Mit der schnellen Lieferung, dem Produkt und

Mit der schnellen Lieferung, dem Produkt und dem Preis bin ich sehr zufrieden. Ich kann den ALMO Shop jedem empfehlen.

7 November 2023 11:38

REISSFESTES TRENNPAPIER

Das ist der Hammer. Habe das viele Jahre gesucht. Hier ist das Trennpapier aus Plastik und geschlitzt. So reisst es nicht ein und man kann sehr zügig den Sockelanschluss machen!

Use with

Topseller

ProLine 150 Roof and facade membrane

Driving rain proof
Open to diffusion
Integrated self-adhesive seam

Product advantages

UV-resistant

Long-term protection

Open to diffusion

Prevents mold growth

Driving rain proof

Waterproof, protection from rain

✓

EASY TO INSTALL - With a surface weight of 150g/m² and double self-adhesive strips (SK), ProLine 150 is safe and quick to install.
✓

EXTREMELY OPEN TO DIFFUSION - The water vapor-permeable special membrane allows the insulation to dry out optimally and prevents mold growth.
✓

VARIABLY APPLICABLE - The ALMO underlay can also be used as a façade membrane for closed facades.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 150 is versatile and can be used for roof pitches from 10°.
✓

VERY TEAR RESISTANT - The three-layer construction with 2 nonwovens on the outside and a special membrane makes the ProLine 150 very tear-resistant
✓

A-classification - The ALMO ProLine 150 complies with the ZVDH classification UDB-A / USB-A.

Technical data

Application	Underlayment
Features	Self-adhesive seam, open to diffusion
Carrier system	Polypropylene fleece
Functional layer	Microporous functional film
Grammage	150 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	315/225
Roll length	25m
Width	1,5m
m² per roll	37,5
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water penetration	W1 (according to DIN 1928)

(11)

Content: 75 m² (€1.56 / 1 m²)

From €43.50

Buy now

ProLine 220G Roof membrane

Grid reinforced
Open to diffusion
Integrated self-adhesive seam

Product advantages

Extremely tear-resistant

Highest tractive force lengthwise & crosswise

Temperature resistant

Withstands extreme conditions

Temporary cover

Flexible use

✓

HIGH-PERFORMANCE AND SAFE - The ALMO 220g underlay sets new standards in roof technology with its four-layer, grid-reinforced structure. It not only offers outstanding diffusion capacity (Sd value 0.02 m) and robustness, but also excellent fall-through protection that meets the strict criteria of DIN 4426.
✓

UV- AND FIRE RESISTANCE - Equipped with a 3-month UV resistance and rated fire class E, our underlayment offers reliable performance in various environmental conditions, making it the ideal choice for numerous construction projects.
✓

OUTSTANDING VAPOR PERMEABILITY - With an sd value of 0.02 m, the UV underlay promotes excellent moisture regulation, improves the indoor climate and effectively prevents mold growth.
✓

APPLICABLE FROM ROOF PITCH > 10° - The ProLine 220G is versatile and can be used for roof pitches from 10°.
✓

WATERPROOF AND OPEN TO DIFFUSION - With a surface weight of 220g/m² and a W1 classification for resistance to water penetration, our underlay membrane guarantees protection against driving rain while remaining open to diffusion and enabling optimum moisture regulation.
✓

USER-FRIENDLY ASSEMBLY - Installation is simplified by two integrated self-adhesive strips, enabling quick and easy installation. This efficient installation method saves considerable time and guarantees lasting reliability and performance.

Technical Data

Application	Underlayment
Features	Grid-reinforced, self-adhesive seam
Carrier system	Polypropylene fleece
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,02m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	700/600
Roll length	50m
Width	1,5m
m² pro Rolle	75
Suitability as temporary covering	4 Weeks
UV resistance	3 Months
Temperature resistance	-40 °C to +80 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

(3)

Content: 75 m² (€2.00 / 1 m²)

From €49.89

Buy now

Topseller

TOPCOAT Thermo 220 Roof membrane

Permanently UV-resistant
Heat resistant
Nail-tight

Product advantages

Highly diffusion-open

Prevents mold growth

Nail-tight

Protects against water ingress

UV-resistant

Permanently UV-stable

✓

PERMANENTLY UV-STABLE - With extreme UV stability, the ALMO TOPCOAT Thermo underlay can withstand intense sunlight and offers long-lasting protection, ideal for permanently exposed applications.
✓

HEAT RESISTANT UP TO 150°C - Developed for extreme temperatures, this underlay can withstand temperatures of up to 150°C and is ideal for hot roof constructions without losing any of its functionality.
✓

DRIVING RAIN-PROOF & NAIL-TIGHT - TOPCOAT Thermo 220 UV provides reliable protection against driving rain and offers high nail tightness, so that your roof remains perfectly sealed in all weather conditions.
✓

HIGHLY DIFFUSION-OPEN - The sd value of 0.1m enables optimum vapor permeability and regulates moisture to effectively prevent mold growth in the roof insulation.
✓

EXTREMELY ROBUST - With its extremely high tear resistance and strong tear propagation resistance, TOPCOAT Thermo 220 UV is particularly robust and can withstand even the most demanding conditions on the construction site.
✓

SECURE BONDING - The integrated self-adhesive seam ensures direct and reliable bonding of the overlaps and effectively protects the insulation from cold air and moisture. This promotes energy efficiency and increases living comfort.

Technical data

ZVDH product data sheet class	UDB-A / USB-A
Application	underlay membrane
Functional layer	Acrylic special coating
Carrier material	Polyester fleece
Characteristics	Permanently UV-stable, nail-proof
Grammage	220 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,1m
Maximum tensile force longitudinal / transverse in N / 50mm	350/260
Execution	1.5m x 50m
Roll length	50m
Width	1,5m
m² per roll	75
UV resistance	Permanent
Temperature resistance	-40 °C to +150 °C
Fire classification	Class E
Resistance to water penetration	W1 (according to DIN 1928)
Suitability as temporary covering	3 months

(6)

Content: 75 m² (€2.79 / 1 m²)

From €52.50

Buy now

TOPCOAT TPU 240 Roof membrane

Nail-tight
Highly diffusible
TPU coating

Product advantages

Nail-tight

Penetration protection

UV-resistant

Long-term protection

Temperature resistant

Withstands extreme conditions

✓

UV-RESISTANT & DURABLE - With a UV resistance of up to 3 months and a robust polyurethane (TPU) coating, our underlayment offers long-lasting protection and durability.
✓

NAIL-TIGHT & RESISTANT TO DRIVING RAIN - The TOPCOAT TPU 240 underlay offers high nail tightness and is resistant to driving rain to ensure maximum protection in all weather conditions.
✓

HIGHLY DIFFUSIBLE - The sd value of 0.15 m guarantees effective moisture regulation and prevents condensation, thereby preventing mold growth.
✓

TEMPERATURE RESISTANCE - Withstands extreme temperatures from -40°C to +100°C while remaining flexible and functional.
✓

TIME SAVING - The integrated self-adhesive seam saves time during installation and ensures quick and secure installation, even with overlaps and connections.

Technical Data

Application	Underlayment
Features	Self-adhesive seam, nail-tight
Carrier system	Polyester fleece
Functional layer	Polyurethane (TPU) coating
Grammage	240 g/m²
Diffusion-equivalent air layer thickness (sd value)	0,15m
Roof pitch	10°
Maximum tensile force longitudinal / transverse in N / 50mm	350/310
Roll length	40m
Width	1,5m
m² per roll	60
Suitability as temporary covering	12 Weeks
UV resistance	3 months
Temperature resistance	-40 °C to +100 °C
Fire classification	Class E (according to EN 13501-1)
Resistance to water passage	W1 (according to DIN 1928)

TOPCOAT TPU roofing membrane installation instructions

Step 1: Align and prepare the roof membrane

Step 2: Attachment in the eaves area

Step 3: Nail sealing tape and counter battens

Step 4: Overlapping and bonding underlayments

Step 5: Ridge sealing

Step 6: Sealing for eaves

Step 7: Seal overlaps to make them windproof

(2)

Content: 60 m² (€2.64 / 1 m²)

From €158.50

Buy now